yourspeeddownload.blogg.se - Use phone as speaker for pc

The cable end for the Apple earbud is exactly the same as the cable end for the Polycom adapter four individual contacts. In the audio control panel I've pushed the microphone level and gain to maximum and still the meter registers no response. Dell connected to the Polycom - The sound output to the speaker works fine it's a beautiful rich sound.Dell connected to Apple earbud headset - Just plug the Apple earbuds into the computer and everything works just fine.iPhone connected to Apple earbud headset - This really should work since Apple spent zillions on developing just the right earbuds for their phone.The person hears everything repeated that they say. iPhone connected to Polycom - Microphone and speaker works fine - One problem noted is a wicked echo on the other side.The application used for testing on the Dell is Microsoft Lync 2010 and the audio control panel for configuration attempts. I have the Polycom cable that converts from the 2.5 mm connector on the SS to the 3.5 mm connector on practically everything else. The Dell has a single headset plug that combines microphone (input) and speakers (output), the same as a cell phone. Refer to the motherboard or computer's documentation to determine if your computer is set up this way.I am trying to use a SS IP 7000 as a microphone/speaker on a Dell XPS 13. Some motherboards do not have an onboard speaker and instead use a computer case speaker that can be removed to disable the speaker. Refer to the motherboard's documentation to determine if your motherboard has such a jumper, and how it should be set. Many motherboard manufacturers have jumpers that, when jumped or not jumped, enable or disable the onboard speaker.Īll motherboards are different. If the steps above don't disable the internal speaker (i.e., there's no Non plug and play Drivers section), the internal speaker can be disabled by the motherboard jumpers. If you want to permanently disable this device, under the Startup type, select Disabled. On the Driver tab, if you want to temporarily disable this device, click the Stop button.

In the Beep properties window, click the Driver tab.

Connect the devices you want to use to broadcast sound and then right-click the speaker icon in the system tray. If you do not see a Non plug and play Drivers section in the Device Manager, skip to the Motherboard jumper section below. You can do this for a mic/speaker combo device like the built-in mic and speakers or you can mix and match, and use your built-in mic with external speakers, wired or Bluetooth.